Google+

Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes

Wheels

CycleOps Trainer Skewer
$12.99
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
Zipp 303 Firecrest Carbon Disc Brake Rear Wheel (Clincher)
$1,300.00
Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at lower pressures with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Plus, Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's oustanding CX-Ray spokes.
Stan's NoTubes Standard Tubeless Kit
$63.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Standard Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
SRAM Roam 30 Front Wheel (27.5-inch)
$242.00
Wherever the trail leads, SRAM's Roam 30 is ready to go. The 25mm wide rims give big tires the support they deserve for outstanding cornering control, and the rims are durable enough for day-after-day sessions, yet light enough for race day. And, the Roam's great features continue with SRAM's Solo Spoke design that uses one spoke length to fit the entire wheel, and quick-release skewer and 15mm thru-axle end caps that can be interchanged without tools.
SRAM Automatix 2 Speed Hub (Coaster Brake)
$85.00
Focus on the ride, not your gear with SRAM's Automatix 2 Speed Hub. A centrifugal clutch in the hub automatically changes gears based on your speed, and a coaster brake takes care of the stopping so there's no shifter, no cables, and no nonsense. All you'll have to do is sit up and enjoy the ride!
Mavic Crossride FTS-X
$119.95 - $129.95
Mavic's Crossride wheels have been a favorite choice among cross country mountain bikers for years. This is due in no small part to their reputation for durability, reliability, and light weight. To achieve this, Mavic laced up the Crossride with 24 stainless-steel bladed spokes, front and rear, and have been constantly improving hub designs to be stronger and lighter in weight. Their QRM bearing standard keeps you rolling smoothly mile after mile with little or no maintenance, and they come with adapters for different axle standards, making your Crossrides versatile for multiple applications. The FTS-X version employs Mavic's FTS-X freehub body design, which offers MTB-specific durability and function with a rugged steel axle.
Shimano Dura-Ace C24 Carbon Clincher Wheel
$488.99 - $1,088.99
Whether you already ride like a pro, or just dream about it, Shimano's Dura-Ace C24 Carbon Clincher Wheels give you the awesome performance to take your road riding to the highest level. The 24mm-deep high-modulus carbon rims are light for awesome acceleration and climbing, plus there are aluminum brake tracks for excellent speed control and durability. What's more, these remarkable hoops boast top-of-the-line Dura-Ace hubs and aero spokes for even more energy savings and free speed.
Stan's NoTubes Downhill Rim Strip
$22.50
Stan's Downhill Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Zipp 404 Firecrest Carbon Rear Wheel (Clincher)
$1,498.00
Zipp’s 404s excel in every terrain. They’re exceedingly fast and agile on the flats, in cross winds, up mountains, and out of sharp criterium corners. Zipp’s 58mm-deep Firecrest rims are extra wide to minimize the gap between tire and rim, making them truly aero in every wind condition. This also allows for a wider tire run at a lower pressure, resulting in less rolling resistance, better ride feel, and a reduced chance of pinch flatting. The 404s are feather-light and built up on Zipp’s stiff hubs with oversize axles, ensuring you get every ounce of power to the road.
Hope Pro2 Evo Fatsno Rear Hub
$300.60
• Sealed Stainless Steel cartridge bearings • Hub shell machined from forged aluminium billet • Available to suit all axle sizes and types • Standard 6 bolt disc fitting • Unsurpassed reliability • Weight 367g
Stan's NoTubes Universal Kit Rim Tape
$6.00
Lay down Stan's Universal Kit Rim Tape before the tubeless conversion of your non-Stan's rims. It makes your rims air tight and ready for tubeless use by covering the spoke holes.
Hope Pro 3 / Pro2 Evo Aluminum Freehub
$98.80
Hope Pro2 Evo Freehub Bodies · Not compatible with Hope Pro2
Kinetic Skewer
$15.00
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
Stan's NoTubes 3.30/3.30Ti 10 x 135 Hub Kit
$17.00
The 3.30/3.30Ti 10 x 135 Hub Kit makes Stan's 3.30 rear hubs 10 x 135 compatible. Installation is easy—just pull the old ones off and put the new ones on.
Mavic XD Freehub Body
$69.95 - $99.95
Mavic's XD freehub body is compatible with all Crossmax and Deemax wheels (2012 and after) or all wheels using TS-2 hubs. This freehub body converts a rear wheel to work with SRAM's XD standard, making the wheel compatible with the XX1 drivetrain. Two kits are available : XD freehub body ITS-4 and XD freehub body TS-2, each with hub-specific parts.
DT Swiss R 23 Spline
$259.00 - $372.00
Comfort joins speed. DT Swiss' R 23 Spline wheels work perfectly with wider road tires. The combination of wide rims and wide tires results in more comfort in the saddle and more grip on the road for faster, more enjoyable rides. The bladed spokes ensure a laterally stiff build so you can carve through corners with confidence and tackle the last climb of the day with enough energy to plan your next big ride.
Shimano Deore XT M756 6-Bolt Disc Front Hub
$40.99
Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface
Zipp AM Rim Tape
$7.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
Zipp 30 Course Disc Brake Front Wheel (Tubular)
$445.00
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more.
Zipp 30 Course Disc Brake Rear Wheel (Tubular)
$555.00
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more.
Stan's NoTubes Rim Tape
$13.00 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Shimano Dura-Ace 9000 Quick Release
$64.00
Shimano Dura-Ace 9000 Hub Quick Release Skewer. - Axle Type: Standard QR
Hope Pro 2 Evo SRAM XD Driver
$108.38
Hope XD-11 Freehub Bodies · For XD 11-speed cassette · For Hope Pro 2 EVO hubs · Contains drive side end cap, bearings and driver
Specialized Roval Traverse Carbon 148 29-inch Wheelset
$1,199.99
The trails in our neck of the woods get pretty hairy, pretty fast, so we've found them to be the perfect testing ground for fast and tough wheels like our Traverse 29 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations. Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb—and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, you get a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering while making tubeless set up quick and easy. A wider rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures to aid in the aforementioned, as well as spreading impact out over a larger surface area to reduce the risk of damage during impact. And when you combine this girth with the notoriously fast rolling 29 platform, you’re left with an incredibly stiff, quick to accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims DT Swiss 350 Classic hubs via 28 (front) and 28 (rear) DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans would otherwise catch. Finally, with the 15x110 / 12x148mm variant, you receive all of the benefits that Boost spacing offers. By increasing the width of the front and rear hub flanges, and in turn, increasing frame and fork clearance and stiffness, you obtain a stiffer, stronger, and more durable system at a minor weight penalty. Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set-up a touch easier. *Please note that Shimano freehubs are sold separately. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 30mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear -Spoke Type: DT Swiss Competition Race - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD endcaps - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, includes SRAM XX1 XD freehub - Includes 31mm OD end caps for the front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1800g
Stan's NoTubes Alloy Tubeless Valve Stems
$23.00 - $24.00
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Zipp Super-9 Disc Carbon Rear Wheel (Clincher)
$2,731.00
Equip yourself with the wheel that carried Tony Martin to a World Championship and reach the pinnacle of your own potential. Zipp’s Super-9 Carbon Clincher Disc underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, increasing aerodynamics and allowing wider tires run at a lower pressure. This diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting.
Shimano 105 11-Speed Rear Hub
$54.99
Smooth-rolling performance and 11-speed compatibility define Shimano's 105 rear hub. Shimano's trademark angular contact bearings ensure that your wheels roll as smooth as silk. This hub includes a Shimano quick-release.
Shimano 105 Front Hub
$30.99 - $40.00
Shimano's 105 Front Hub is an excellent beginning to a strong, light front wheel. The diamond-polished bearing races mean the hub rolls super smooth and the labyrinth seals shut out dust, dirt and water. Plus, the cold-forged-aluminum hub shell is beautiful and built to last. You get Shimano's excellent quick-release skewer, too.
Shimano SLX Rear Boost Hub
$56.99
- Model Number FH-M7010-B2 - Series SLX - Disc Rotor Mount Center Lock Disc - Axle: 148x12mm - 12mm thru-axle - 32-hole - Weight: 357 grams
DT Swiss M 1700 Spline 25
$348.00 - $506.00
Rainy days, wet soil, rocks and roots. The tubeless tires somehow find grip. The M 1700 SPLINE 25 comes stock with tubeless rim tape and valves, just the right tool for demanding trails. The wide rim gives the tire that decisive little bit more support while the Ratchet System freewheel ensures safe engagements even in the most averse conditions. Finally, being a lightweight helps you to quickly get back up to that trail entrance, to start the slip-and-grip fest all over again.
Page 1 of 22 Next page