Built to be just as robust and just as precise as its world-renowned sibling, the PowerTap Single-Sided Pedal has all the innovation of the P1 pedals – at a fraction of the price. Named for its single-sided nature, the PowerTap Single-Sided Pedal doubles the watts produced by the left pedal to calculate total power. The PowerTap Single-Sided Pedal also touts the same plug-and-play installation, easy-to-swap, cross-bike compatibility, along with dual-band ANT+ and Bluetooth as its bi-lateral counterpart. Ideal for the bike enthusiast, the weekend warrior or the power-training curious, there is no better way to get started with accurate pedal-based power than the PowerTap Single-Sided Pedal. - Weight: 390 grams per pair of pedals (without batteries) - Thread Type: 9/16" - Cleat Interface: 3 bolt - Cleat: Red, 6 degree floating - Spring Type: Adjustable Elastomer - Proven PowerTap accuracy - Release Tension: 6-20 Nm - Stack Height: 14mm - Center of Pedal: 53mm (measured from crank to pedal) - Lean Angle: 25.5 degrees (based on 175mm crank length, 75mm BB drop and 147mm Q-Factor crank) - Firmware Updates: Over the air - Connectivity: ANT+ and Bluetooth SMART - Battery: AAA Lithium (alkaline and/or rechargeable alkaline batteries not recommended for extended use) - Battery Life: 60 hours - No weight limit - PowerTap Single-Sided Pedals are not capable of providing advanced pedal metric data. In order to display advanced pedal metric data you must be using dual-sided P1 pedals.
The XPro 15 is the ultimate expression in pedal technology. Created for competitive cyclists and triathletes seeking a competitive edge, the XPro 15 features CeramicSpeed watt-saving bearings, a hollow titanium axle and a super light carbon body giving you a pedal that weighs 88 grams per pedal. ICLIC, with its pre-opened engagement system, makes it super easy to clip in. The low stack height and oversized pedal platform make pedaling more efficient and comfortable.
Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.
The world’s most successful downhill pedal is now available in a premium edition featuring titanium wings and dual-chamfered edges to minimize weight and maximize performance. The Crank Brothers Mallet DH 11 is designed and engineered for the rider who wants the best of the best, and nothing less. - Titanium wings for reduced weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Spindle material: forged SCM 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: 6AL/4v titanium - Spring material: 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type: IGUS LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Endcap hex alloy - Cleat: Premium brass cleats with shims included - Weight: 445 grams
The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all. - Titanium wings to reduce weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 6 adjustable pins per side for grip - Traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - 52mm q-factor for maneuverability on tight trails - Hex alloy endcap for durability - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system
The clipless track pedal is finally here. The era of straps, a far cry from what the ever-evolving science of aerodynamics suggests, is over. The KEO BLADE CARBON CERAMIC Track Edition brings the numerous advantages and especially the carbon blade that have already proven their worth on the road, to the wooden boards of the velodrome. The pedal offers the reassuring feeling of security of a strap thanks to a control roller that adjusts pedal opening, and also triggers the release of the foot in the event of a fall. - Technology: Blade - Cleats: Keo Cleat - Tension: Serial installed in 16 with Track Manual Locker - Body: Carbon - Blade: Carbon - Spindle: Chromoly+ - Bearings: Ceramic - Platform area: 700mm² - Platform width: 67mm - Q Factor: 53mm - Stack height + cleats: 14.8mm (8.5 + 6.3mm) - Weight (pedal): 121g - Weight (pair + cleats): 310g
Speciale is the ultimate balance between aesthetics and performance. Developed by Time's engineers for the demands of the sport, this enduro pedal is made of a 6106-T6 aluminum body which is 20% more durable than other grades of aluminum. It features a wide platform, adjustable pins for optimal grip, and a micro-adjustable clamping system to meet the demands of the most advanced riders. The proven ATAC engagement system (TIME patent) allows easy clip in and positive, predictable release as well as a design that self-cleans even in the most difficult conditions. Like all Time pedals, the Speciale is 100% made in France at their factory in Nevers, exceeding high material and production standards.
- Excellent Pedaling Efficiency - Optimized Balance Of Weight And Rigidity - Injection Molded Carbon Composite Body - Hollow Cleat Bolt - Efficient Power Transfer - High Stability - Extra-Wide Platform - Efficient Power Transfer/Durability - Reduces Flex And Pedal Body Wear - Stainless Steel Body Plate - Excellent Pedaling Efficiency - Smooth Rotation - 2-Ball Bearing, 1-Wide Roller Bushing - Reliable Durability Performance - Stable And Uniform Load Distribution - Wide Bearing Placement - Rider Tune - Customize The Entry And Release Tension Settings - Adjustable Entry And Release Tension Settings - Shimano 3-Year Limited Warranty - Average Weight: 224g - Shimano SPD-SL cleats included - Standard (52mm) - Wide (56mm)
Ride with rage without compromising safety. This is what best defines the X-TRACK EN-RAGE, our top-of-the-line enduro pedal. The PLUS Ti model features a titanium axle for added strength and improved stiffness all while shaving grams. The wide, forged aluminum body on all PLUS models will increase stability and support across the most challenging terrain. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Forged Aluminum - Spindle: Titanium - Platform area: 664mm² - Platform width: 67mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 200g - Weight (pair + cleats): 450g - Float angle: 6° - Release angle: 13°
The ceramic bearing and famous BLADE technology transfers 100% of your power input to the drivetrain, making the KEO BLADE CARBON CERAMIC pedals a great choice. With the wide, 700mm² contact area, your foot will become one with the pedal, as you become one with your bike. - Technology: Blade - Cleats: Keo Cleat - Retention: Serial installed in 12 + additional 16 in box, 20 sold separately - Body: Carbon - Blade: Carbon - Spindle: Chromoly+ - Bearings: Ceramic - Platform area: 700m² - Platform width: 57mm - Q Factor: 53mm - Stack height + cleats: 14.8mm (8.5mm + 6.3mm) - Weight (pedal): 110g - Weight: (pair + cleats): 290g
Speedplay's Zero Stainless are superb pedals for road cycling thanks to their light weight, cornering clearance, adjustability and easy entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, and independently adjust the lateral and fore/aft positioning. Plus, these pedals are exceptionally light, making them a great choice for your prized road rocket. They boast needle and cartridge bearings for smooth rotation and a cleat-based engagement mechanism that ensures you won’t clip out when going hard. - Fits all standard 3-Hole and 4-Hole shoes - Thin, contoured cleat profile makes walking easier and more fluid
Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
The XPro 10 is perfect for high performance riders. With a carbon body and hollow steel axle the XPro 10 is light and durable at the same time. The ICLIC system is pre-opened making clipping in super easy. The XPro 10 features carbon blade tension adjustment, a low stack height and an oversized pedal platform for pedaling efficiency and comfort.
Competition-oriented and customizable for refined fit, feel, and power transfer. Details - Durable alloy body - Durable cast steel wings - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - Hex alloy endcap and bashguard - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system Specs - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 52mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 320g per pair - Wing Material: 17-4PH stainless
Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair
PD-M820 FEATURE - Wider contact area - Thinner pedal body - 4 adjustable pins height on each platform BENEFIT - More stability in combination with AM shoes - Lower stack height and less chance of hitting the obstacles - Better grip when not stepped-in - Average weight: 546 g (w/o pins & washers) - 4 height adjustable pins 1.0mm cleat spacer included - Binding: Dual Sided - Cleat included: SM-SH51 - Optional cleat: SM-SH56 - Pedal Type: Off-Road/DH (SPD) - Reflector: SM-PD60
The industry’s first all-in-one premium youth components upgrade kit, which is ergonomically optimized to enhance performance and ultimate control. - Includes Slater 90 pedals, Slater 650 bar, Slater Jr. grips, and a Fly Jr. saddle - Includes light plastic 22.2 to 19mm shims, located inside the packaging with the instruction manual - Age: Youth - Rail Material: Steel - Clamp Style: Standard Rails - Material: Synthetic - Length: 235mm - Width: 122mm - Weight: 270g
PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65
Speedplay's Zero Chromolys are fantastic pedals for road cycling thanks to their low weight, cornering clearance, adjustability and easy dual-sided entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, or independently adjust the lateral and fore/aft positioning. They boast needle and cartridge bearings and a cleat-based engagement mechanism that ensures you won’t clip out when going hard. - Dual sized, self-locating entry is easy and precise, every time - Large, stable pedaling platform - Fits any shoe with a 3 or 4-hole mount
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years
Crank Brothers' Mallet 3 pedals sport the company's super easy-to-enter/exit 4-sided cages with wide aluminum/polycarbonate platforms for stellar support and stability, as well as tough chromoly axles with steel wings for durability, making these great pedals ideal for downhill riding and free riding. The open design quickly sheds mud for reliability in sloppy conditions and the traction pins grip well when you're riding clipped out between corners.
Enduro riding is rough on all bike components, and pedals are often the first in the line of fire. The X-TRACK EN-RAGE PLUS pedal features a forged aluminum body for incredible strength. The pedals are SPD compatible and will confidence on the roughest trails thanks to a 13° disengagement angle. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Forged Aluminum - Spindle: Chromoly+ - Platform area: 664mm² - Platform width: 67mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 225g - Weight (pair + cleats): 500g - Float angle: 6° - Release angle: 13°
The X-TRACK RACE CARBON pedals offer the best surface contact area-to-weight ratio, thanks to a carbon body design. The large surface area and shape also offers plenty of stability to ensure a consistent feeling pedal stroke. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Carbon - Spindle: Chromoly+ - Platform area: 515mm² - Platform width: 60mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 175g - Weight (pair + cleats): 400g - Float angle: 6° - Release angle: 13°
$125.00 - $130.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. With triple-sealed cartridge bearings and durable chromoly spindles, these pedals will spin smoothly for countless rides. Plus, four degrees of float helps your knees track naturally during every crank revolution.
- A super slim 12mm for maximized pedal clearance, weight optimized trail pedal at 360g per set. - Forged alloy body is shot peened and anodized for increased durability - Equipped with forged hollow taper chromoly steel axles for unmatched strength - Sealed bearings, IGUS bushings - 18 preassembled pins in virtual concavity for ultimate grip and stability on trails - KEY TECHNOLOGIES: MGR, industrial grade axle assembly, chamfered leading edges - MATERIAL: Forged MGR alloy body, CNC optimized - PLATFORM SIZE (mm): 100 x 100 - PLATFORM PROFILE (mm): 12 - WEIGHT (g): ±360 / Set - AXLE: Cold forged chromoly steel - BEARING / BUSHING Full complement industrial sealed bearing, IGUS bushing - PINS: 18 steel pins (per pedal) - virtual concavity configuration - FINISH: Shot peen anodized, CNC logos
Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)
Chase your dreams with the KEO 2 MAX CARBON pedal. The large contact area offers perfect power transfer from your legs to your bike. The carbon body provides a lightweight, efficient platform, while the Chromoly+ axle offers reliability in all conditions. Install your pedal, adjust the tension, and you're ready to ride. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Carbon - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 60mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 125g - Weight (pair + cleats): 312g
Page 1 of 3 Next page