Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Full-Suspension

Pivot Cycles Mach 429SL TEAM XTR Di2 1x - Race Build
$8,899.00 - $9,174.00
Pivot’s Mach 429 SL is the 100mm 29er you want for ultimate power transfer efficiency and technical trail mastery. On climbs, you'll benefit from the latest in dw-link suspension design with a Fox Float DPS Kashima Factory shock that's performance-tuned specifically for the Mach 429SL. On the trip back down, the 100mm dw-link suspension performs like a longer travel bike, especially when combined with a Fox 32 Factory 100mm fork. Add the precision of a 12x148mm rear end and the rollover qualities of 29-inch wheels, and you’ve got the advantage in technical terrain and breakneck-speed descents. The Mach 429SL Team XTR Di2 1x Race Build features a superlight, technologically advanced Shimano XTR Di2 drivetrain, delivering a wide 1x11-speed gear range with Di2's instantaneous shifting and flawless precision. This race-winning drivetrain is paired with Shimano's top-tier XTR hydraulic disc brakes for maximum control to scrub speed when it counts. Place all that hardware on the Team edition's DT Swiss XMC 1200 carbon wheels, wrapped in race-dialed Maxxis rubber, and you're headed directly to victory.
Pivot Cycles Mach 5.5 Carbon TEAM XTR 2x
$8,699.00 - $9,098.00
Pivot’s Mach 5.5 is truly a jack of all trades and master of every single one. Built on a high-modulus carbon frame, the 140mm of dw-link suspension unites concepts learned from both the XC and downhill domains. The result is a trail bike that claws its way up just about anything with unparalleled pedaling efficiency, then eats up square-edge bumps, sticking like glue to white-knuckle descents. Pivot dialed in that suspension control front and rear with a Fox Factory DPS EVOL shock and 160mm Fox 36 Factory fork, both more than ready to tackle the A line where the C line scares off most. Harness the Mach 5.5’s built-in climbing prowess with the seamless shifting and massive range of its full Shimano XTR 2 x 11-speed drivetrain, knowing you have the control to push your limits with the race-ready power served up by Shimano XTR Trail brakes. And, the Mach 5.5 Team build features robust Reynolds carbon rims laced to Industry Nine hubs, all rolling on front- and rear-specific Maxxis 27.5 x 2.6 WT tires, giving you gallons of traction without spilling an ounce of speed.
Specialized S-Works Women's Epic
$9,019.95 $10,020.00 10% Off
Sure, there are other "fast" XC bikes out there, but you'd be hard-pressed to find one with all the features of the new Women's S-Works Epic. With a Rider-First Engineered design, refined and improved Brain suspension, and a redesigned frame, the Women's S-Works Epic is the fastest, most capable, and best fitting women's XC bike we've ever created. Racecourses have evolved over the past few years. They're more technical, steeper, and more challenging to ride. But instead of quivering in our boots, we saw this as an opportunity to make something special—something that both World Cup athletes and XC riders alike can instantly feel the benefit from. We looked at the sum of parts that make a bike handle well, like the head angle, reach, stack, chainstay length, fork offset, etc., and reevaluated all of it. Increasing the reach made a bike that was more stable at speed and generally more comfortable to ride. Dropper posts? Yep, those fit, and not just a short-travel XC option, but full-length droppers that fit in the 30.9mm seat tube. Head angle? We slacked that out, but not without evaluating the overall handling package. It now lands on a custom offset, 42mm fork that works with the slacker head angle in order to behave itself in tight corners and through switchbacks. Next comes Brain 2.0. The original Brain changed the way the bike world looked at suspension, both in its inefficiencies and benefits alike. And oh, was it good. It won races and put a flag in the ground for us as a true leader in innovation and suspension development, but we knew that we could make it better. Simple physics told us that, by moving the Brain closer to the rear axle, it would be in the most sensitive spot. And after countless hours with the RockShox team, the Brain became more than just a slight upgrade. It's totally reborn. Now, it reacts seamlessly to bump forces, it has much more consistent damping performance, and finally, it integrates the hoses into the suspension links. This, in turn, improves oil paths, and it creates an incredibly sleek package that outperforms anything on the market. The Epic also has a rider Rider-First Engineered design that places complex carbon pieces in all the right places, and this greatly increases stiffness in the front-end for a vast improvement in ride quality and control. To go along with this, each frame size has size-specific tubes that result in the stiffest, best riding XC bike we've ever developed—no matter the frame size. And while stiffness, Brain technology, and geometry features are cool and all, we know what you're thinking, 'What about weight?' We're glad you asked. With the goal of the new Epic to be the fastest XC mountain bike we've ever made, weight was at the top of our priorities list. We started with an efficient frame layout and tube shapes that feature clean cable routing, integrated channels through the shock extension, straight tubes with fewer curves, and optimized torsion profiles in every section. And, if you're curious, this weight savings is equivalent to shedding a chainstay and shock extension from the previous Epic—nearly 350 grams. For the S-Works model, the build spares no expense, with a custom RockShox SID World Cup fork with our exclusive Brain technology, a rear RockShox Brain shock at the rear that's custom-tuned for women, a 12-speed SRAM XX1 Eagle groupset, powerful SRAM Level Ultimate brakes, and hand-built, featherweight Roval Control SL carbon fiber wheels. - S-Works FACT 12m carbon fiber frame is the best combination of stiffness, strength, and light overall weight, resulting in the utmost efficiency and speed. Meanwhile, the new geometry, RockShox Brain shock, and 100mm of travel make the Epic the best handling, fastest XC bike you've ever been on. - Our custom RockShox SID WC fork with Brain features a full-carbon upper, top-adjust Brain Fade, and a custom offset, making it the perfect match to the new Epic. - The Roval Control SL carbon wheels are the ultimate XC wheelset. They feature a 25mm internal width for optimal grip and rolling resistance, a strong, hookless bead rim construction, and weigh-in at a scant 1320g.
Pivot Cycles Mach 4 Carbon TEAM XTR Di2 1x
$8,799.00 - $9,014.00
Pivot’s premier XC/Trail bike, the Mach 4 Carbon, rolls on 27.5-inch DT Swiss XMC 1200 carbon wheels and features 115mm of dw-link travel and next-generation geometry paired with a lightweight full-suspension frame. Short chainstays, a spacious cockpit, and the incredibly stiff carbon chassis enable you to achieve your fastest times on climbs, while an ultra-stable front end geometry, low BB height, and 115mm of travel let you truly light it up on descents. The Mach 4 Team XTR 1x features Shimano’s cutting-edge XTR Di2 drivetrain, delivering flawless electronic shifting though a wide 1x11-speed gear range, all with the light weight and gorgeous aesthetic synonymous with XTR. And, this drivetrain is mated to a pair of Shimano XTR Trail hydraulic disc brakes that offer incredible power to precisely manage speed when every second counts. Add the all-terrain capabilities of the 130mm Fox 34 Factory fork and Float Factory DPS shock and you have the responsive, nimble bike that likes to cross the finish line first.
Pivot Cycles Mach 4 Carbon TEAM XTR Di2 1x Race Build
$8,799.00 - $9,014.00
Pivot’s premier XC/Trail bike, the Mach 4 Carbon, rolls on 27.5-inch DT Swiss XMC 1200 carbon wheels and features 115mm of dw-link travel and next-generation geometry paired with a lightweight full-suspension frame. Short chainstays, a spacious cockpit, and the incredibly stiff carbon chassis enable you to achieve your fastest times on climbs, while an ultra-stable front end geometry, low BB height, and 115mm of travel let you truly light it up on descents. The Mach 4 Team XTR 1x features Shimano’s cutting-edge XTR Di2 drivetrain, delivering flawless electronic shifting though a wide 1x11-speed gear range, all with the light weight and gorgeous aesthetic synonymous with XTR. And, this drivetrain is mated to a pair of Shimano XTR Trail hydraulic disc brakes that offer incredible power to precisely manage speed when every second counts. Add the ultra-efficient, trail-tracking capabilities of the 100mm Fox 32 Factory fork and Float Factory DPS shock and you have the responsive, nimble bike that likes to cross the finish line first.
Pivot Cycles Firebird TEAM XX1 Eagle
$8,999.00
Built for tackling everything from Enduro World Cup courses to fast and flowy shuttle runs, the Pivot Firebird compromises nothing in your search for all-mountain versatility. 170mm of front and rear suspension travel lets you confidently blaze through washed-out rock gardens, and the combination of long reach, long front center, and short chainstays provide the high-speed, playful agility we're all after in a long-travel bike. What really sets this bike apart, though, is the pedaling efficiency offered by the dw-link rear suspension design. Pedaling such a leggy machine can seem daunting, but the Firebird's geometry and efficient suspension platform urge you to climb higher to score maximum reward. The Firebird Team XX1 Eagle build gives you the massive gear range that SRAM's incredible XX1 Eagle drivetrain provides to give you the advantage no matter where you ride. SRAM Guide Ultimate brakes supply both power and modulation in volumes, while Industry Nine hubs laced to Reynolds Enduro Carbon rims, all wrapped in wide, toothy Maxxis Minions leave nothing to be desired in the strength and traction departments. Fox suspension components precisely complement the Firebird's character with a 36 Factory fork and Float X2 Factory shock, while a Fox Transfer dropper seatpost wraps up this clean build that's ready to shred your favorite jump line, park run, or enduro race straight off the showroom floor.
Pivot Cycles Mach 6 Carbon TEAM XX1 Eagle
$8,999.00
Whether you’re screaming down a 4,000-foot descent or putting in the work to get to the top, Pivot's Mach 6 Carbon dominates all terrain. It's full carbon frame is designed with 27.5-inch wheels and features finely tuned dw-link suspension that throws down 155mm of travel. That means every bit of this enduro shred machine is optimized to rule the trails. It climbs quickly with a steep seat angle and top tube length, yet descends even better with a 65.75-degree head angle, low bottom bracket, and custom tuned Fox Float Factory DPX2 shock. The frame is set up with internal cable routing, stealth dropper post routing, ISCG05 tabs, and post-mount disc caliper mounts. For an aggressive bike like this, stiffness is key, so you have a PF92 bottom bracket, tapered head tube, and Boost 148 rear spacing for maximum response and efficiency. For the Mach 6 Carbon TEAM XX1 Eagle build Pivot specs terrain-eating performance with SRAM's incredibly wide-ranging, precisely shifting XX1 Eagle 12-speed drivetrain, and follows with SRAM Guide Ultimate brakes for tight modulation and all-conditions control. The Mach 6 TEAM builds roll on Reynolds Carbon rims laced to Industry Nine hubs, and it's all wrapped in Maxxis High Roller II tires for a combination of lightweight, smooth precision and rad-rated traction. And, a stout Fox 36 Factory fork puts precise, unwavering control in your hands for utmost confidence during high-stakes descents.
Pivot Cycles Switchblade PRO X01 Eagle 27.5+
$7,199.00 - $8,898.00
Purpose-built to meet the demands of enduro and aggressive trail riding, Pivot’s Switchblade is a versatile ripper with a huge advantage no matter where you shred. Combining modern geometry tweaks with a stiff and lightweight carbon frame gives you both unmatched high-speed stability through chunky terrain and effortless split-second manuals over seemingly impossible obstacles. With a 135mm-travel double wishbone rear triangle design employing dw-link’s anti-squat and variable wheel travel path, the Switchblade achieves the best performance in high speed and technical sections while also maintaining precise handling and an efficient, poppy ride. A 150mm Fox 36 Factory FIT4 fork attacks obstacles relentlessly while a Fox Factory DPS EVOL shock expertly handles spring and damping duties in the rear. This Pro X01 Eagle build features the SRAM's X01 Eagle drivetrain with a huge gear range to get you anywhere on the mountain. Shimano XT hydraulic disc brakes follow up with great power and modulation, while the DT Swiss 27.5+ wheelset teams up with 2.8-inch Maxxis rubber to carve through dirt with sharp precision and insane traction. A Fox Transfer dropper post and Phoenix carbon handlebar complete the stellar spec, giving you an outstanding all-terrain, all-conditions ride.
Pivot Cycles Switchblade PRO X01 Eagle 29
$7,199.00 - $8,898.00
Purpose-built to meet the demands of enduro and aggressive trail riding, Pivot’s Switchblade is a versatile ripper with a huge advantage no matter where you shred. Combining modern geometry tweaks with a stiff and lightweight carbon frame gives you both unmatched high-speed stability through chunky terrain and effortless split-second manuals over seemingly impossible obstacles. With a 135mm-travel double wishbone rear triangle design employing dw-link’s anti-squat and variable wheel travel path, the Switchblade achieves the best performance in high speed and technical sections while also maintaining precise handling and an efficient, poppy ride. A 150mm Fox 36 Factory FIT4 fork attacks obstacles relentlessly while a Fox Factory DPS EVOL shock expertly handles spring and damping duties in the rear. This PRO X01 Eagle build features the SRAM's X01 Eagle drivetrain with a huge gear range to get you anywhere on the mountain. Shimano XT hydraulic disc brakes follow up with great power and modulation, while the DT Swiss wheelset teams up with Maxxis rubber to carve through dirt with precision. A Fox Transfer dropper post and Phoenix carbon handlebar complete the stellar spec, giving you an outstanding all-terrain, all-conditions ride.
Pivot Cycles Mach 5.5 Carbon PRO X01 Eagle
$7,099.00 - $8,798.00
Pivot’s Mach 5.5 is truly a jack of all trades and master of every single one. Built on a high-modulus carbon frame, the 140mm of dw link suspension unites concepts learned from both XC and downhill domains. The result is a trail bike that claws its way up just about anything with unparalleled pedaling efficiency, then eats up square-edge bumps, sticking like glue to white-knuckle descents. Pivot dialed in that suspension control front and rear with a Fox Factory DPS EVOL shock and 160mm Fox 36 Factory fork, both more than ready to tackle the A line where the C line scares off most. Harness the Mach 5.5’s built-in climbing prowess with the huge range and simplified shifting of a SRAM X01 Eagle 12-speed drivetrain, while knowing you can push your limits with the always-there power of XT brakes. And, wide DT Swiss M1700 wheels roll on front- and rear-specific Maxxis 27.5 x 2.6 WT tires so you get gallons of traction without spilling an ounce of speed.
Pivot Cycles Switchblade TEAM XTR 1x 27.5+
$8,399.00 - $8,798.00
Purpose-built to meet the demands of enduro and aggressive trail riding, Pivot’s Switchblade is a versatile ripper with a huge advantage no matter where you shred. Combining modern geometry tweaks with a stiff and lightweight carbon frame gives you both unmatched high-speed stability through chunky terrain and effortless split-second manuals over seemingly impossible obstacles. With a 135mm-travel double wishbone rear triangle design employing dw-link’s anti-squat and variable wheel travel path, the Switchblade achieves the best performance in high speed and technical sections while also maintaining precise handling and an efficient, poppy ride. A 150mm Fox 36 Factory FIT4 fork attacks obstacles relentlessly while a Fox Factory DPS EVOL shock expertly handles spring and damping duties in the rear. This Team XTR 1x build features Shimano's superlight XTR drivetrain, powered up by a Race Face Next SL carbon crankset. XTR Trail hydraulic disc brakes follow up with tremendous power and svelte weight, while the Reynolds Enduro carbon and Industry Nine 27.5+ wheelset teams up with 2.8-inch Maxxis rubber to carve through dirt with sharp precision and insane traction. A Fox Transfer dropper post and Phoenix carbon handlebar complete the stellar spec, giving you an outstanding all-terrain, all-conditions ride.
Pivot Cycles Switchblade TEAM XTR 1x 29
$8,399.00 - $8,798.00
Purpose-built to meet the demands of enduro and aggressive trail riding, Pivot’s Switchblade is a versatile ripper with a huge advantage no matter where you shred. Combining modern geometry tweaks with a stiff and lightweight carbon frame gives you both unmatched high-speed stability through chunky terrain and effortless split-second manuals over seemingly impossible obstacles. With a 135mm-travel double wishbone rear triangle design employing dw-link’s anti-squat and variable wheel travel path, the Switchblade achieves the best performance in high speed and technical sections while also maintaining precise handling and an efficient, poppy ride. A 150mm Fox 36 Factory FIT4 fork attacks obstacles relentlessly while a Fox Factory DPS EVOL shock expertly handles spring and damping duties in the rear. This TEAM XTR 1x build features Shimano's superlight XTR drivetrain, powered up by a Race Face Next SL carbon crankset. XTR Trail hydraulic disc brakes follow up with tremendous power and svelte weight, while the Reynolds Enduro carbon and Industry Nine wheelset teams up with Maxxis rubber to carve through dirt with precision. A Fox Transfer dropper post and Phoenix carbon handlebar complete the stellar spec, giving you an outstanding all-terrain, all-conditions ride.
Pivot Cycles Mach 429SL TEAM XX1 Eagle
$8,499.00 - $8,774.00
Pivot’s Mach 429 SL is the 100mm 29er you want for ultimate power transfer efficiency and technical trail mastery. On climbs, you'll benefit from the latest in dw-link suspension design with a Fox Float DPS Kashima Factory shock that's performance-tuned specifically for the Mach 429SL. On the trip back down, the 100mm dw-link suspension performs like a longer travel bike, especially when combined with a Fox 34 Factory 120mm fork. Add the precision of a 12x148mm rear end and the rollover qualities of 29-inch wheels, and you’ve got the advantage in technical terrain and breakneck-speed descents. TheThe Mach 429SL Team XX1 Eagle features SRAM's class-leading XX1 Eagle 1x12 drivetrain, delivering a huge gear range with incredible light weight and the shifting precision you expect from SRAM. This race-ready drivetrain is paired with Shimano's legendary XT hydraulic disc brakes for maximum speed control. With all this top-shelf hardware, you can't skimp on wheels, and Pivot came through strong with a set of DT Swiss XMC 1200 carbon wheels to make sure it's a silky-smooth, lightweight spin to the podium.
Pivot Cycles Mach 429SL TEAM XX1 Eagle - Race Build
$8,499.00 - $8,774.00
Pivot’s Mach 429 SL is the 100mm 29er you want for ultimate power transfer efficiency and technical trail mastery. On climbs, you'll benefit from the latest in dw-link suspension design with a Fox Float DPS Kashima Factory shock that's performance-tuned specifically for the Mach 429SL. On the trip back down, the 100mm dw-link suspension performs like a longer travel bike, especially when combined with a Fox 32 Factory 100mm fork. Add the precision of a 12x148mm rear end and the rollover qualities of 29-inch wheels, and you’ve got the advantage in technical terrain and breakneck-speed descents. TheThe Mach 429SL Team XX1 Eagle Race Build features SRAM's class-leading XX1 Eagle 1x12 drivetrain, delivering a huge gear range with incredible light weight and the shifting precision you expect from SRAM. This race-ready drivetrain is paired with Shimano's legendary XT hydraulic disc brakes for maximum speed control. With all this top-shelf hardware, you can't skimp on wheels, and Pivot came through strong with a set of DT Swiss XMC 1200 carbon wheels to make sure it's a silky-smooth, lightweight spin to the podium.
Pivot Cycles Firebird TEAM XTR 2x
$8,699.00
Built for tackling everything from Enduro World Cup courses to fast and flowy shuttle runs, the Pivot Firebird compromises nothing in your search for all-mountain versatility. 170mm of front and rear suspension travel lets you confidently blaze through washed-out rock gardens, and the combination of long reach, long front center, and short chainstays provide the high-speed, playful agility we're all after in a long-travel bike. What really sets this bike apart, though, is the pedaling efficiency offered by the dw-link rear suspension design. Pedaling such a leggy machine can seem daunting, but the Firebird's geometry and efficient suspension platform urge you to climb higher to score maximum reward. The Firebird Team XTR 2x build gives you a renowned XTR 2x11 drivetrain deliver race-winning shifting and mountain-dominating range no matter where or how you ride. Shimano XTR Trail brakes supply ridiculous braking power, while Industry Nine hubs laced to Reynolds Enduro Carbon rims, all wrapped in wide, toothy Maxxis Minions leave nothing to be desired in the strength and traction departments. Fox suspension components precisely complement the Firebird's character with a 36 Factory fork and Float X2 Factory shock, while a Fox Transfer dropper seatpost wraps up this clean build that's ready to shred your favorite jump line, park run, or enduro race straight off the showroom floor.
Pivot Cycles Mach 6 Carbon TEAM XTR 2x
$8,699.00
Whether you’re screaming down a 4,000-foot descent or putting in the work to get to the top, Pivot's Mach 6 Carbon dominates all terrain. It's full carbon frame is designed with 27.5-inch wheels and features finely tuned dw-link suspension that throws down 155mm of travel. That means every bit of this enduro shred machine is optimized to rule the trails. It climbs quickly with a steep seat angle and top tube length, yet descends even better with a 65.75-degree head angle, low bottom bracket, and custom tuned Fox Float Factory DPX2 shock. The frame is set up with internal cable routing, stealth dropper post routing, ISCG05 tabs, and post-mount disc caliper mounts. For an aggressive bike like this, stiffness is key, so you have a PF92 bottom bracket, tapered head tube, and Boost 148 rear spacing for maximum response and efficiency. For the Mach 6 Carbon TEAM XTR 2x build Pivot specs terrain-eating performance with Shimano's silky smooth, broad-ranging XTR 2x11-speed drivetrain, and follows with XTR Trail brakes for lightweight power and all-conditions control. The Mach 6 Team builds roll on Reynolds Carbon rims laced to Industry Nine hubs, and it's all wrapped in Maxxis High Roller II tires for a combination of lightweight, smooth precision and rad-rated traction. And, a stout Fox 36 Factory fork puts precise, unwavering control in your hands for utmost confidence during high-stakes descents.
Pivot Cycles Mach 5.5 Carbon TEAM XTR 1x
$8,299.00 - $8,698.00
Pivot’s Mach 5.5 is truly a jack of all trades and master of every single one. Built on a high-modulus carbon frame, the 140mm of dw-link suspension unites concepts learned from both the XC and downhill domains. The result is a trail bike that claws its way up just about anything with unparalleled pedaling efficiency, then eats up square-edge bumps, sticking like glue to white-knuckle descents. Pivot dialed in that suspension control front and rear with a Fox Factory DPS EVOL shock and 160mm Fox 36 Factory fork, both more than ready to tackle the A line where the C line scares off most. Harness the Mach 5.5’s built-in climbing prowess with the seamless shifting precision of a full Shimano XTR 11-speed drivetrain, knowing you have the control to push your limits with the race-ready power served up by Shimano XTR Trail brakes. And, the Mach 5.5 TEAM build features robust Reynolds carbon rims laced to Industry Nine hubs, all rolling on front- and rear-specific Maxxis 27.5 x 2.6 WT tires, giving you gallons of traction without spilling an ounce of speed.
Pivot Cycles Mach 429SL TEAM XTR 2x
$8,399.00 - $8,674.00
Pivot’s Mach 429 SL is the 100mm 29er you want for ultimate power transfer efficiency and technical trail mastery. On climbs, you'll benefit from the latest in dw-link suspension design with a Fox Float DPS Kashima Factory shock that's performance-tuned specifically for the Mach 429SL. On the trip back down, the 100mm dw-link suspension performs like a longer travel bike, especially when combined with a Fox 34 Factory 120mm fork. Add the precision of a 12x148mm rear end and the rollover qualities of 29-inch wheels, and you’ve got the advantage in technical terrain and breakneck-speed descents. The Mach 429SL Team XTR 1x features a superlight 2x11 XTR drivetrain, delivering a colossal gear range with the smooth shifting and classy aesthetic that comes with the XTR pedigree. This all-mountain dominating drivetrain is paired with Shimano's legendary XT hydraulic disc brakes for maximum speed control to scrub speed when it counts. Place all that hardware on the Team edition's DT Swiss XMC 1200 carbon wheels, wrapped in race-dialed Maxxis rubber, and you're headed directly to victory.
Pivot Cycles Mach 4 Carbon TEAM XX1 Eagle
$8,399.00 - $8,614.00
Pivot’s premier XC/Trail bike, the Mach 4 Carbon, rolls on 27.5-inch DT Swiss XMC 1200 carbon wheels and features 115mm of dw-link travel and next-generation geometry paired with a lightweight full-suspension frame. Short chainstays, a spacious cockpit, and the incredibly stiff carbon chassis enable you to achieve your fastest times on climbs, while an ultra-stable front end geometry, low BB height, and 115mm of travel let you truly light it up on descents. The Mach 4 Team XX1 Eagle features SRAM's class-leading XX1 Eagle 1x12 drivetrain, delivering a huge gear range with incredible light weight and the shifting precision you expect from SRAM. All that SRAM-power is nicely balanced by Shimano XT hydraulic disc brakes that offer incredible control to manage speed when every second counts. Add the all-terrain capabilities of the 130mm Fox 34 Factory fork and Float Factory DPS shock and you have the responsive, nimble bike that likes to cross the finish line first.
Pivot Cycles Mach 4 Carbon TEAM XX1 Eagle - Race Build
$8,399.00 - $8,614.00
Pivot’s premier XC/Trail bike, the Mach 4 Carbon, rolls on 27.5-inch DT Swiss XMC 1200 carbon wheels and features 115mm of dw-link travel and next-generation geometry paired with a lightweight full-suspension frame. Short chainstays, a spacious cockpit, and the incredibly stiff carbon chassis enable you to achieve your fastest times on climbs, while an ultra-stable front end geometry, low BB height, and 115mm of travel let you truly light it up on descents. The Mach 4 Team XX1 Eagle features SRAM's class-leading XX1 Eagle 1x12 drivetrain, delivering a huge gear range with incredible light weight and the shifting precision you expect from SRAM. All that SRAM-power is nicely balanced by Shimano XT hydraulic disc brakes that offer incredible control to manage speed when every second counts. Add the ultra-efficent, trail-tracking capabilities of the 100mm Fox 32 Factory fork and Float Factory DPS shock and you have the responsive, nimble bike that likes to cross the finish line first.
Specialized S-Works Men's Stumpjumper 27.5
$8,569.95 $9,520.00 10% Off
We’ve heard it all before: “This bike’s for going fast, that one’s for having fun.” “This one pedals well, that one shreds.” Why not make one bike that does everything well? Well, we did, and it's called the S-Works Stumpjumper. Unrivaled handling and stiffness, sublime suspension kinematics, and a complete abandon of proprietary nonsense—it rides like a dream. And with 27.5-inch wheels, this model blends responsiveness with stability to create the pinnacle of trail performance. Our design goal for the new Stumpjumper was simple—build the ultimate trail bike, one that feels telepathic. And it turns out that this feeling all comes down to stiffness. Think of it this way: when the frame's telling your hands one thing and your feet another, your brain gets confused with the imbalance and the bike feels unstable. In order to fix this, we had to get to work on dialing-in the materials, shapes, and the layout. We started by creating our own mountain-specific stiffness test, and then we looked at the layout with Finite Element Analysis (FEA) to see where we could get the biggest stiffness improvements. This led to a big discovery: The Large and X-Large frames needed more front-end stiffness while the Smalls and Mediums were just fine. We were able to create a frame design that was 20% more efficient. And in the end, this proved to be one of the lightest trail frames on the market, today. When designing the frame with the stiffness targets being a main goal, we developed a radical new sidearm design. The front-end and rear-end are connected at three points, and the sidearm helps keep all these points super stiff and connected, all while taking about 100 grams out of the rear-end. More explicitly, this minimizes frame flex when the rear suspension is active. We continued down the suspension path with a custom Rx Trail Tune on both the fork and rear shock. Suspension performance is highly dependent on frame, wheel, and rider size, so we use our Rx Tune to get each bike to land in the middle of the adjustment spectrum, and this gives you the biggest possible range to fine-tune your ride. Another focal point of the tune was matching the suspension characteristics between wheel sizes—we developed a specific Rx Tune for each platform. So, no matter what wheel size you prefer, you’ll get perfectly linear suspension. Steps were also taken to make this bike easy to live with. Threaded bottom brackets make a triumphant return, and we made room for up to a 3.0' tire. You're also free to run whatever aftermarket rear shock you want since we're using standard metric shocks. We revamped the SWAT box, too, making it sleeker, lighter, and with more volume. And customization is furthered with a Flip Chip that lets you to dial-in your Stumpy to your riding style. Switch it from High to Low and it drops your bottom bracket 6mm and slackens the head tube by half-a-degree. Little details also jump out to surprise you, like a newly designed ribbed chainstay protector that makes chain slap a thing of the past and nearly silences the drivetrain. Lastly, we seriously couldn’t make cable routing any easier on carbon models. Full tubes can be found throughout the carbon frame, so all you have to do is push the cable and it’ll come out the other end. No more lazy loop, hidden stashes of magnets, pokey spokes, or pillows to cry in. As with every S-Works build, this S-Works Stumpjumper comes with only top-of-the-line parts, like a full SRAM XX1 Eagle drivetrain, SRAM Guide RSC disc brakes, FOX Factory front and rear suspension (150/150mm respectively), and the best carbon wheels money can buy, the Roval Traverse SL 27.5s. - The Stumpjumper's asymmetrical, S-Works FACT 11m carbon fiber construction is lightweight, stiff, and ready to take on the trail. It's built off our 27.5 Trail Geometry, so it's just the right amount of both capable and comfortable. And with SWAT integration in the down tube, a threaded BB, easy cable routing, and an all-new chain silencer, it's ready for anything the trail, or you, throw at it. - FOX FLOAT DPX2 Factory has three modes—Open, Trail, and Firm—that control large compression adjustments on-the-fly. There's also a tool to adjust compression adjustment that allows for fine-tuning of the compression in Open mode. - The legendary FIT4 damper, large stanchions, buttery-smooth Kashima coating—the FOX 36 Factory 150mm fork is one of the best out there.
Specialized S-Works Men's Stumpjumper 29
$8,569.95 $9,520.00 10% Off
We’ve heard it all before: “This bike’s for going fast, that one’s for having fun.” “This one pedals well, that one shreds.” Why not make one bike that does everything well? Well, we did, and it's called the S-Works Stumpjumper. Unrivaled handling and stiffness, sublime suspension kinematics, and a complete abandon of proprietary nonsense—it rides like a dream. And with 29-inch wheels, you’re free to climb and descend at the hyperspeed that 29ers are known for. - The Stumpjumper's asymmetrical, FACT 11m carbon fiber construction is lightweight, stiff, and ready to take on the trail. It's built off our 29 Trail Geometry, so it's just the right amount of both capable and comfortable. And with SWAT integration in the downtube, a threaded BB, easy cable routing, and an all new chain silencer, it's ready for anything the trail, or you, throw at it. - FOX FLOAT DPX2 Factory has three modes—Open, Trail, and Firm—that control large compression adjustments on-the-fly. There’s also a tool adjust compression adjustment that allows for fine-tuning of the compression in Open mode. - The legendary FIT4 damper, large stanchions, buttery-smooth Kashima coating—the FOX 36 Factory 150mm fork is one of the best out there.
Specialized S-Works Men's Stumpjumper ST 27.5
$8,569.95 $9,520.00 10% Off
We love the fast and planted feeling of the new Stumpjumper, but not everyone needs 150mm of travel. And if you're in the market for a trail bike that's more nimble and snappy, the S-Works Stumpjumper ST 27.5 takes it to a whole new level. Its shorter travel (130mm front/130mm rear), and slightly steeper geometry bring out the true "feel" of the trail—making popping off lips and railing berms even more lively. Plus, you get even more responsiveness and stability from the 27.5 wheels. - The Stumpjumper ST's asymmetrical, FACT 11m carbon fiber construction is lightweight, stiff and ready for technical climbs and rowdy descents. It's built off of our 27.5 Trail Geometry, so it's both capable and comfortable. And with SWAT integration in the down tube, a threaded BB, easy cable routing, and a brand new chain silencer, it's ready for anything the trail, or you, throw at it. - The FOX DPS Factory rear shock features our Rx Trail Tune, ensuring that no matter the wheel or frame size, your bike is dialed-in perfectly. - With the legendary FIT4 damper, large and lightweight stanchions, and buttery-smooth Kashima coating, the FOX 34 Factory 130mm fork is one of the best out there.
Pivot Cycles Mach 4 Carbon TEAM XTR 2x
$8,299.00 - $8,514.00
Pivot’s premier XC/Trail bike, the Mach 4 Carbon, rolls on 27.5-inch DT Swiss XMC 1200 carbon wheels and features 115mm of dw-link travel and next-generation geometry paired with a lightweight full-suspension frame. Short chainstays, a spacious cockpit, and the incredibly stiff carbon chassis enable you to achieve your fastest times on climbs, while an ultra-stable front end geometry, low BB height, and 115mm of travel let you truly light it up on descents. The Mach 4 Team XTR 1x features Shimano’s legendary XTR drivetrain, delivering a mountain-dominating, 2x11-speed gear range with incredible light weight and tight shifting tolerances. And, this drivetrain is mated to a pair of Shimano XTR Trail hydraulic disc brakes that offer incredible power to precisely manage speed when every second counts. Add the all-terrain capabilities of the 130mm Fox 34 Factory fork and Float Factory DPS shock and you have the responsive, nimble bike that likes to cross the finish line first.
Specialized S-Works Enduro 27.5
$8,500.00
If you love sending it down the trail, smashing through rock gardens, launching off drops and jumps, and carving through singletrack at ungodly speeds, you'll feel right at home aboard the S-Works Enduro 27.5. We gave it a geometry that features a slacker front end, a longer top tube, short chainstays, and a lower bottom bracket. All of this together makes the bike truly feel glued to the ground, and the platform is more responsive and capable then ever. We even added some bits, like integrated storage with a SWAT Door at the down tube, and made "old" new again by making a triumphant return to a threaded bottom bracket. To keep the weight down, the frame is constructed from our top-tier FACT IS-X 11m carbon fiber. And to ensure top-level performance on the descents, this material choice is greeted by 170mm of plush rear and 170mm front travel, plus a geometry that can be "adjusted" via a shock extension with a "low/high" setting. For the build, this Enduro spares no expense at hitting the pinnacle of performance, with a full SRAM XX1 Eagle 12-speed groupset, powerful Guide RSC Carbon brakes, hand-built carbon Roval wheels, our Command Post IRcc Wu dropper post, and the revolutionary Ohlins single-tube rear shock handling suspension duties out back. Make the mountain bend to you. - The frame's FACT IS-X 11m carbon fiber construction stands as the pinnacle of lightweight, efficient, and tough trail performance. It's been built off our 27.5 Geometry in order to provide an aggressive, well-rounded ride. And with internal Command Post IR routing, a return to a threaded bottom bracket, and an integrated SWAT Door at the down tube, you get a bike that's clean, dependable, and ready for anything that the trail has to offer. - Featuring a three-chamber air spring and TTX (Twin Tube) damping, the Ohlins RXF 36 fork perfectly mates stiffness with a plush, responsive ride quality, and stays smooth and high in the travel without compromising bump absorption, traction, or stability. It also features high-/low-speed and rebound adjustments, and sports 170mm of plush travel. - The one-by drivetrain is controlled by SRAM's venerable XX1 Eagle components. The system forms the ultimate in efficiency and intuitive feel, while also having the added benefit of significant weight savings and minimal required maintenance.
Pivot Cycles Firebird PRO X01 Eagle
$7,099.00 - $8,399.00
Built for tackling everything from Enduro World Cup courses to fast and flowy shuttle runs, the Pivot Firebird compromises nothing in your search for all-mountain versatility. 170mm of front and rear suspension travel lets you confidently blaze through washed-out rock gardens, and the combination of long reach, long front center, and short chainstays provide the high-speed, playful agility we're all after in a long-travel bike. What really sets this bike apart, though, is the pedaling efficiency offered by the dw-link rear suspension design. Pedaling such a leggy machine can seem daunting, but the Firebird's geometry and efficient suspension platform urge you to climb higher to score maximum reward. The Firebird Pro X01 Eagle build gives you the massive gear range that SRAM's X01 Eagle drivetrain provides to give you the advantage no matter where you ride. Shimano XT hydraulic disc brakes supply all the power you need, and DT Swiss M1700 Spline wheels wrapped in wide, toothy Maxxis Minions leave nothing to be desired in the strength and traction departments. Fox suspension components precisely complement the Firebird's character with a 36 Factory fork and Float X2 Factory shock, while a Fox Transfer dropper seatpost wraps up this clean build that's ready to shred your favorite jump line, park run, or enduro race straight off the showroom floor.
Pivot Cycles Mach 6 Carbon PRO X01 Eagle
$7,099.00 - $8,399.00
Whether you’re screaming down a 4,000-foot descent or putting in the work to get to the top, Pivot's Mach 6 Carbon dominates all terrain. It's full carbon frame is designed with 27.5-inch wheels and features finely tuned dw-link suspension that throws down 155mm of travel. That means every bit of this enduro shred machine is optimized to rule the trails. It climbs quickly with a steep seat angle and top tube length, yet descends even better with a 65.75-degree head angle, low bottom bracket, and custom tuned Fox Float Factory DPX2 shock. The frame is set up with internal cable routing, stealth dropper post routing, ISCG05 tabs, and post-mount disc caliper mounts. For an aggressive bike like this, stiffness is key, so you have a PF92 bottom bracket, tapered head tube, and Boost 148 rear spacing for maximum response and efficiency. For the Mach 6 Carbon PRO X01 Eagle build Pivot specs terrain-eating performance with SRAM's incredibly wide-ranging X01 Eagle 12-speed drivetrain, and follows with power-to-spare XT brakes for all-conditions control. DT Swiss M1700 wheels and Maxxis High Roller II tires take directional cues from the stout Fox 36 Factory fork, putting precise control in your hands for utmost confidence during high-stakes descents.
Pivot Cycles Mach 429SL PRO X01 Eagle
$6,699.00 - $8,309.00
Pivot’s Mach 429 SL is the 100mm 29er you want for ultimate power transfer efficiency and technical trail mastery. On climbs, you'll benefit from the latest in dw-link suspension design with a Fox Float DPS Kashima Factory shock that's performance-tuned specifically for the Mach 429SL. On the trip back down, the 100mm dw-link suspension performs like a longer travel bike, especially when combined with a Fox 34 Factory 120mm fork. Add the precision of a 12x148mm rear end and the rollover qualities of 29-inch wheels, and you’ve got the advantage in technical terrain and breakneck-speed descents. The Mach 429SL Pro X01 Eagle features SRAM's XO1 Eagle 1x12 drivetrain, delivering a huge gear range with the shifting precision you expect from SRAM. This race-ready drivetrain is paired with Shimano's legendary XT hydraulic disc brakes for maximum speed control.
Pivot Cycles Mach 429SL PRO X01 Eagle - Race Build
$6,699.00 - $8,309.00
Pivot’s Mach 429 SL is the 100mm 29er you want for ultimate power transfer efficiency and technical trail mastery. On climbs, you'll benefit from the latest in dw-link suspension design with a Fox Float DPS Kashima Factory shock that's performance-tuned specifically for the Mach 429SL. On the trip back down, the 100mm dw-link suspension performs like a longer travel bike, especially when combined with a Fox 32 Factory 100mm fork. Add the precision of a 12x148mm rear end and the rollover qualities of 29-inch wheels, and you’ve got the advantage in technical terrain and breakneck-speed descents. The Mach 429SL Pro X01 Eagle Race Build features SRAM's XO1 Eagle 1x12 drivetrain, delivering a huge gear range with the shifting precision you expect from SRAM. This race-ready drivetrain is paired with Shimano's legendary XT hydraulic disc brakes for maximum speed control.
Pivot Cycles Firebird TEAM XTR 1x
$8,299.00
Built for tackling everything from Enduro World Cup courses to fast and flowy shuttle runs, the Pivot Firebird compromises nothing in your search for all-mountain versatility. 170mm of front and rear suspension travel lets you confidently blaze through washed-out rock gardens, and the combination of long reach, long front center, and short chainstays provide the high-speed, playful agility we're all after in a long-travel bike. What really sets this bike apart, though, is the pedaling efficiency offered by the dw-link rear suspension design. Pedaling such a leggy machine can seem daunting, but the Firebird's geometry and efficient suspension platform urge you to climb higher to score maximum reward. The Firebird Team XTR 1x build gives you a renowned XTR 1x11 drivetrain deliver race-winning shifting no matter where or how you ride. Shimano XTR Trail brakes supply ridiculous braking power, while Industry Nine hubs laced to Reynolds Enduro Carbon rims, all wrapped in wide, toothy Maxxis Minions leave nothing to be desired in the strength and traction departments. Fox suspension components precisely complement the Firebird's character with a 36 Factory fork and Float X2 Factory shock, while a Fox Transfer dropper seatpost wraps up this clean build that's ready to shred your favorite jump line, park run, or enduro race straight off the showroom floor.